Product Search
Categories
- Firebasket (15)
- News (120)
- Special offer (5)
- Special offer (80)
- T O O L S (213)
- Action Parts
- Hammerheads (1)
- Keyboard Parts
- Wire & Strings
- Tuning Pins
- Metal Parts
- Wood Parts
- Felt, Leather & Paper
- Screws & Pins
- Benches
- Lamps
- Castor Cup
- Castors & Transport (24)
- Covers
- surface treatment
- Accessoires
- Lubricant / glue
- Catalogues + Brochures (3)
- STEINWAY genuine parts (95)
- YAMAHA genuine parts (34)
Information
Customers who bought this product also bought
Product 19 / 24
DRIVE TIP 50 N·m
maximum torque50 Nm
Direction of tighteningFor right and left-hand tightening
Torque measuring accuracy±4 %
Test certificateManufacturer’s test certificate
Overall length L332 mm
Torque range10 Nm - 50 Nm
Scale graduation, 1 graduation =0.5 Nm
Weight600 g
Square drive3/8 in
Displayanalogue
Release signallingvisual
Connection formatPush-through square drive (ratchet)
Measurement technologymechanical
Data can be recordedno
Setting the trigger valueMemory pointer
Feedbackdisplaying
Reversible readingNm
Measurement processTorque
Adjustable trigger valuenon-adjustable
StandardDIN EN ISO 6789
Lever length without plug-in head [l1]221 mm
Lever length including factory calibration reference dimension [l3]257 mm
Type of productTorque Wrench
Description
Version:
One-armed; slim design with easily readable dial gauge. Body entirely of steel, chrome-plated with fixed square drive for plug-in heads.
Units of measure: Nm
Non-slip 2-component handle.
Function:
Actual torque can be read on the gauge whilst working; the final value is held by the memory pointer to be read later.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
Torque wrench with dial gauge display, maximum torque: 50N·m
DRIVE TIP In order to check the firmness of the tuning pin on the pin block. The torque should lie between 15 âEUR' 20 Nm. With a towed pointer this is measurable in both directions and is readable. Completely with star hole application of HALE.
10N·m - 50N·m
Instructions PDF
Product details
Technical Datamaximum torque50 Nm
Direction of tighteningFor right and left-hand tightening
Torque measuring accuracy±4 %
Test certificateManufacturer’s test certificate
Overall length L332 mm
Torque range10 Nm - 50 Nm
Scale graduation, 1 graduation =0.5 Nm
Weight600 g
Square drive3/8 in
Displayanalogue
Release signallingvisual
Connection formatPush-through square drive (ratchet)
Measurement technologymechanical
Data can be recordedno
Setting the trigger valueMemory pointer
Feedbackdisplaying
Reversible readingNm
Measurement processTorque
Adjustable trigger valuenon-adjustable
StandardDIN EN ISO 6789
Lever length without plug-in head [l1]221 mm
Lever length including factory calibration reference dimension [l3]257 mm
Type of productTorque Wrench
Description
Version:
One-armed; slim design with easily readable dial gauge. Body entirely of steel, chrome-plated with fixed square drive for plug-in heads.
Units of measure: Nm
Non-slip 2-component handle.
Function:
Actual torque can be read on the gauge whilst working; the final value is held by the memory pointer to be read later.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
