Product Search
Categories
- Firebasket (15)
- News (121)
- Special offer (5)
- Special offer (84)
- T O O L S (214)
- Action Parts
- Hammerheads (1)
- Keyboard Parts
- Wire & Strings
- Tuning Pins
- Metal Parts
- Wood Parts
- Felt, Leather & Paper
- Screws & Pins
- Benches
- Lamps
- Castor Cup
- Castors & Transport (24)
- Covers
- surface treatment
- Accessoires
- Lubricant / glue
- Catalogues + Brochures (3)
- STEINWAY genuine parts (95)
- YAMAHA genuine parts (34)
Information
Product 43 / 49
Grand Piano keyboard lid protector
Grand Piano keyboard lid protector grand piano fallboard brake
Diameter of plate 16 mm + anti-turn stop
We recommend first drilling the recess 10 mm diam., to a depth of 15 mm for the anti-turn stop (position 100° back, measured from the vertical).
Then the main bore 16 mm diam., 30 mm deep for the brake cylinder.
The position of the brake cylinder is usually 31 mm above the lower edge of the fall-board.
The counter fittings are 10 x 40 mm.
Diameter of plate 16 mm + anti-turn stop
We recommend first drilling the recess 10 mm diam., to a depth of 15 mm for the anti-turn stop (position 100° back, measured from the vertical).
Then the main bore 16 mm diam., 30 mm deep for the brake cylinder.
The position of the brake cylinder is usually 31 mm above the lower edge of the fall-board.
The counter fittings are 10 x 40 mm.
