Product Search
Categories
- Firebasket (15)
- News (122)
- Special offer (3)
- Special offer (82)
- T O O L S (215)
- Action Parts
- Hammerheads (1)
- Keyboard Parts
- Wire & Strings
- Tuning Pins
- Metal Parts
- Wood Parts
- Felt, Leather & Paper
- Screws & Pins
- Benches
- Lamps
- Castor Cup
- Castors & Transport (24)
- Covers
- surface treatment
- Accessoires
- Lubricant / glue
- Catalogues + Brochures (3)
- STEINWAY genuine parts (95)
- YAMAHA genuine parts (33)
Information
Customers who bought this product also bought
Product 1 / 1
Spray adhesive 500 ml
Fast-drying contact and assembly adhesive for all lightweight materials
High temperature resistance
Permanent firm hold for virtually all applications
Quick-drying
Thanks to fast hardening, working material can be loaded and processed further after just a short time
Does not bleed through
Adjustable spray nozzle
Ideal for use in an extremely wide range of applications
Silicone-free
Notice
Caution: Not suitable for bonding soft PVC, PVC films and particle board cutting edges. When adhering hard foam/Styrofoam, the adhesive must be applied to a small suitable area first to check compatibility, depending on the type of hard foam. After use, turn the can on its head and spray until the valve is empty.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
High temperature resistance
Permanent firm hold for virtually all applications
Quick-drying
Thanks to fast hardening, working material can be loaded and processed further after just a short time
Does not bleed through
Adjustable spray nozzle
Ideal for use in an extremely wide range of applications
Silicone-free
Notice
Caution: Not suitable for bonding soft PVC, PVC films and particle board cutting edges. When adhering hard foam/Styrofoam, the adhesive must be applied to a small suitable area first to check compatibility, depending on the type of hard foam. After use, turn the can on its head and spray until the valve is empty.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
