Product Search
Categories
- Firebasket (15)
- News (120)
- Special offer (5)
- Special offer (80)
- T O O L S (213)
- Action Parts
- Hammerheads (1)
- Keyboard Parts
- Wire & Strings
- Tuning Pins
- Metal Parts
- Wood Parts
- Felt, Leather & Paper
- Screws & Pins
- Benches
- Lamps
- Castor Cup
- Castors & Transport (24)
- Covers
- surface treatment
- preparation (36)
- Cleaner / thinner (19)
- Touch up / Fillers (53)
- steel wool etc. (9)
- Brushes / Wood Tools (32)
- Waxes / oils (56)
- Bag / Sets (5)
- Finish (47)
- glaze inside/outside (24)
- Varnish & Polish
- around Shellac (23)
- Polish (78)
- Accessories (17)
- other (20)
- alle Products from BORMA WACHS (229)
- LA TROMBA Products (16)
- Accessoires
- Lubricant / glue
- Catalogues + Brochures (3)
- STEINWAY genuine parts (95)
- YAMAHA genuine parts (34)
Information
Customers who bought this product also bought
.jpg)
Product 37 / 229
Shellac Polish SCHWARZ 500 ml
This ready to use natural Shellac French Polish, formulated following the oldest Tradition, makes it possible to finish all interior wooden surfaces to a high level of brightness whilst maintaining a pleasing softness. Its natural amber colour help to achieve an intense and warm finishing, particularly associated with classic furniture.
Description
For special effects, this polish can be coloured with the Borma multipurpose dyes.
How to use
The wood must not be varnished; it must be free of dust, grease and wax.After sanding (with 240/400 paper), the product must be applied at a room temperature no lower than 10°C.
Apply a number of fine coats by brush or pad (avoid burns). Due to the high concentration of active substance, on difficult substrates it may be necessary to dilute the product with 10-20% of Borma Shellac 99, in order to ease the application.
Between coats, wait at least 1-2 hours; ensure that the previous application is dry before further applications.
After at least three applications, with the surface dry, with a cloth dampened with special degreaser for shellac finishes, pass a fine layer until all oil deposits are removed, to exalt the full beauty of the finish. Completely dry after 24 hours at 20°C. To conserve the finish and give the antique effect, apply Beeswax in paste form.
Description
For special effects, this polish can be coloured with the Borma multipurpose dyes.
How to use
The wood must not be varnished; it must be free of dust, grease and wax.After sanding (with 240/400 paper), the product must be applied at a room temperature no lower than 10°C.
Apply a number of fine coats by brush or pad (avoid burns). Due to the high concentration of active substance, on difficult substrates it may be necessary to dilute the product with 10-20% of Borma Shellac 99, in order to ease the application.
Between coats, wait at least 1-2 hours; ensure that the previous application is dry before further applications.
After at least three applications, with the surface dry, with a cloth dampened with special degreaser for shellac finishes, pass a fine layer until all oil deposits are removed, to exalt the full beauty of the finish. Completely dry after 24 hours at 20°C. To conserve the finish and give the antique effect, apply Beeswax in paste form.
