Product Search
Categories
- Firebasket (15)
- News (120)
- Special offer (5)
- Special offer (81)
- T O O L S (212)
- Action Parts
- Hammerheads (1)
- Keyboard Parts
- Wire & Strings
- Tuning Pins
- Metal Parts
- Wood Parts
- Felt, Leather & Paper
- Screws & Pins
- Benches
- Lamps
- Castor Cup
- Castors & Transport (24)
- Covers
- surface treatment
- preparation (36)
- Cleaner / thinner (19)
- Touch up / Fillers (53)
- steel wool etc. (9)
- Brushes / Wood Tools (32)
- Waxes / oils (56)
- Bag / Sets (5)
- Finish (47)
- glaze inside/outside (24)
- Varnish & Polish
- around Shellac (23)
- Polish (78)
- Accessories (17)
- other (20)
- alle Products from BORMA WACHS (229)
- LA TROMBA Products (16)
- Accessoires
- Lubricant / glue
- Catalogues + Brochures (3)
- STEINWAY genuine parts (95)
- YAMAHA genuine parts (36)
Information
Customers who bought this product also bought
.jpg)
Product 1 / 56
Teak Oil Spray 400 ml
Mix of odourless drying oils, for indoor and outdoor use, ideal for all types of unfinished or time-worn woods.
Method of Usage
On application, in-depth penetration in wood fibre, non peeling, protecting the wood from adverse weather conditions and harmful agents, enhancing the tone and natural beauty.
Before use, shake the container well for a few seconds.
On a clean and dry surface free of dust and grease, spray the Teak Oil directly from a distance of approx. 25cm.
Apply at least two coats at an interval of at least 2/4 H , to enable the first coat to dry.
With the surface dry, after around 8-12 h at 20°C, application of wax or a paint finish is possible.
Method of Usage
On application, in-depth penetration in wood fibre, non peeling, protecting the wood from adverse weather conditions and harmful agents, enhancing the tone and natural beauty.
Before use, shake the container well for a few seconds.
On a clean and dry surface free of dust and grease, spray the Teak Oil directly from a distance of approx. 25cm.
Apply at least two coats at an interval of at least 2/4 H , to enable the first coat to dry.
With the surface dry, after around 8-12 h at 20°C, application of wax or a paint finish is possible.
